35 Watt Amplifier

Bogen 35 Watt Amplifier



- Bogen 35 watt wall-mounted telephone paging amplifier
- Inputs for 600-ohm balanced telephone line, LO-Z balanced microphone, and background music
- Integral automatic level control circuit for controlling pages made by persons with varying voice levels and paging techniques
- Page from telephone and/or microphone
- Signal-activated paging channel automatically mutes background music
- Adjustable background music muting level during a page
- Music gradually returns to its normal level after a page
- Aphex Aural Exciter increases intelligibility, improves perceived loudness (with no increase in power), and reduces listener fatigue
- Seperate controls for page volume, music volume, night ringer, music mute and Aphex Aural Exciter
- Bass and treble controls
- Built-in night ringer activated by contact closure or by 90V ring signal
- Balanced or unbalanced 16-ohm, 25V, 25VCT, and 70V outputs
- VOX sensitivity level control eliminates transmission of background noise when paging from a telephone
- Thermal and electronic overload protection
- Jacks provided for bridging additional TPU amplifiers
- Brackets are attached for easy wall mounting
- Peak level indicator lights when amplifier is driven into clipping
- 120V AC, 60Hz power source
- UL and CSA listed

BGTPU35B

• 13

• Binding: Electronics
• Label: Bogen
• Model: BG-TPU35B
• Product Group: CE

HLA-300V Plus HF Professional Linear Amplifier With Fans

RM Italy HLA-300V Plus HF Professional Linear Amplifier With Fans



Frequency - 1,5 - 30 MHz Ham Amp,Input energy/power - 40 A, Input power - 2-15 W, Input power SSB - 4-30 W, Output power - 300 W Max , Output power SSB - 500 W Max,Mode - All,Fuse - 4 x 10 A,Output power level - 23 Fans Installed on this amp, Size - 450x190x70 mm, Electronic switch,Micro Processor,SWR & Thermal protection,Watt meter,Auto Band Selector,Output power level - 2,The built-in protection circuitry, automatically sounds and or bypasses the amp in situations where damage could be caused to the circuitry or when spurious emissions are excessively high due to incorrect band selection.A full range HF amplifier with automatic or manual band switching.Ideal for use with the Yaesu FT817 & FT897 and Icom 703, but suitable for use with any low power HF radio.It works great with the Flex Radio, you can use this amp for flex-1500 makes QSOs world wide.Also works great on Elecraft KX3 radio, It will work well with all the QRP rigs plug and play

• A full range HF amplifier with automatic or manual band switching.
• Ideal for use with the Yaesu FT817 & FT897 and Icom 703, but suitable for use with any low power HF radio.
• Frequency : 1.5 - 30 MHz , covers 160 meters, 80 meters, 60 meters, 40 meters, 30 meters, 20 meters, 17 meters, 15 meters, 12 meters and 10 meters
• These units are for industrial, scientific, medical, or export use only. It is a violation of US FCC regulations to use it on 11 meter band in US.
• Input power - 2-15 W, Output power - 300 W Max (Output power SSB - 500 W Max)

• Binding: Electronics
• Label: RM Italy
• Color: White
• Model: HLA300V
• Product Group: CE

Melody Valve Hifi Pure Black 101 Preamplifier

Melody Valve Hifi Pure Black 101 Preamplifier



1 pair of balanced XLR inputs 1 pair of balanced XLR outputs 4 pairs of single ended RCA inputs 2 pair of single ended RCA outputs Audiophile grade components Hand soldered with point to point wiring Balanced design High gloss piano like lacquer finish Elegant styling

• Vacuum Tubes:101Dx2, 6SN7x4, 5Z3x1 Frequency Response: 3Hz - 100KHz
• Input Impedance: 250K? Output: 3V (Max 28V) T.H.D.: 0.02%
• Channel Balance: <0.5dB (20Hz -100kHz) Total Gain: 20db S/N: >90db
• AC Power: 220-240V+/-5%, 50Hz/60Hz
• Dimensions(inch): 18(W)x15(D)x8(H) Weight: 60 lbs

• Model: au00003
• Product Group: Single Detail Page Misc

The Stereo Power Amplifier

The Emotiva XPA-200 Stereo Power Amplifier



The Emotiva XPA-200 stereo power amplifier delivers two channels of true audiophile sound quality, with plenty of power to drive even low efficiency speakers effortlessly, in a convenient and attractive package. If you've been waiting to upgrade the amps in your stereo receiver, or move up to audiophile separates, the XPA-200 is your chance to do so with rare power and style. Equally at home powering a superb stereo system, or the front channels of an audiophile surround sound system, the XPA-200 delivers 120 watts per channel into 8 ohms, or 240 watts per channel into 4 ohms of powerful, clean, audiophile grade audio power. The highly refined amplifier circuitry in the XPA-200 handles subtle details with finesse, while the hefty power supply provides plenty of dynamic power reserves for demanding source material. Inside, the XPA-200 boasts the advanced engineering, high quality components, a heavy-duty toroidal transformer power supply, and Emotiva's classic short signal path Class A/B technology. Also on tap is the transparent yet comprehensive protection circuitry. Outside, you get classic Emotiva styling, solid machined brass gold plated RCA jacks, and full-sized five-way binding posts

• Audiophile stereo power amplifier; 240 watts / channel @ 4 Ohms; 120 watts / channel @ 8 Ohms
• Fully discrete signal path, with class A/B output stage and massive power reserves
• Balanced and unbalanced inputs; gold plated input connectors and full-sized speaker outputs
• Microprocessor operating system with full fault protection and status indicators
• Quality parts and construction throughout, backed by a five-year warranty.

• Binding: Electronics
• Label: Emotiva Audio Corporation
• Model: XPA-200
• Product Group: Receiver or Amplifier

HDMI 1080p 3D Splitter/Distribution Amplifier

Calrad 40-1061-HS-8 HDMI 1080p 3D Splitter/Distribution Amplifier



The Calrad 40-1061-HS-8 1x8 HDMI 1080p 3D Splitter/Distribution Amplifier allows you to view an HDMI signal coming from a single source on eight different HDTV displays or monitors at the same time. Setup takes only seconds - simply connect an HDMI cable from your source component such as a cable/satellite TV receiver or Blu-ray player to the input of the Amplifier and connect up to eight additional HDMI cables to up to eight separate HDTVs or monitors and plug in the splitter; HDMI cables sold separately. This splitter/distribution amplifier supports full HD 1080p as well as 3D signals.

• 1 HDMI source input to 8 HDMI Outputs
• Support video resolution up to 1080p and audio up to 7.1 channel Digital
• LED source/input indicators
• Cascadable design for connecting multiple units
• HDCP and HDMI 3D compliant

• Binding: Electronics
• Label: Calrad
• Model: 40-1061-HS-8
• Product Group: CE

GPN1200K TSD Masking Generator Kit

Atlas Sound GPN1200K TSD Sound Masking Generator Kit



The Atlas Sound GPN1200K is a sound masking kit solution that includes the TSD-GPN1200 sound masking generator, TSD-PS24V250MA power supply, and TSD-RMK 1RU rack mount kit.

• Balanced Line Output Plus 4W, 70.7V Output
• Adjustable Gain and Hi-Cut Filter
• EQ & Gain Bypass for Line Output
• Selectable Pink or White Noise Source
• Supports up to 4 TSD Series Modules

• Binding: Electronics
• Label: Atlas Sound
• Model: GPN1200K
• Product Group: Receiver or Amplifier

Mi-Tube - Valve Amplifier with Bluetooth in Black

Fatman - Mi-Tube - Valve Amplifier with Bluetooth in Black



Cool beauty delivering 28 watts per channel of pure listening pleasure.The very latest edition to the range for 2012, the Mi-Tube is compact and sexy, but still packs a solid punch. Producing 28w per channel this is no lightweight when it comes to power. Utilising a radical new hybrid valve design, the basis of which was first suggested in a theoretical paper 50 years ago, it just sings with quality... And looks stunning.Thanks to its Bluetooth connectivity audio can also be streamed wireless! This opens the Mi-Tube to more than just iPhone's and iPod's, to any Bluetooth Enabled device.This is a hybrid valve amplifier for the connoisseur. Cool Beauty.

• Vacuum Tube Amplifier
• With Bluetooth
• Valve processing gives warm, rich, audio characteristics
• 2 x Line Inputs
• Max Output Power: 28w x 2

• Binding: Electronics
• Label: Fatman
• Model: MITUB
• Product Group: Receiver or Amplifier

Sinovt 6SQ7 KT66 Single Ended SE Class A Tube Valve Amplifier AMP,Point To Point Wiring

RAPHAELITE Sinovt 6SQ7 KT66 Single Ended SE Class A Tube Valve Amplifier AMP,Point To Point Wiring



est China tube amplifier in top line with stunning appearanceMade with point to point wiring, Not PCB.Great quality transformer to ensure great sound stageCoupling caps use MIT(USA) Hi-End audio capacitorsTriode / standard connection of KT66 is switchable via a two throw switch,Taster difference of the sonic You are looking at a charming singled ended tube amplifier with KT66 pentode tube, What you attracted is not only the appearance but also its sound stage. Massive power transformer and output transformer applied to obtain low thermal rise and better bass, Absolutely would be the best tube amplifier upgrade solution for an audiophile.The amplifier is made by SINOVT which is the best tube amplifier manufacture in China, The quality and sound stage is more better than the other brand's. The power transformer is a huge one almost the same with the transformer on many Pull-Push amplifiers, The output transformer is made with multi-layout coils, Each primary coil is wound between two secondary coils,There are 3 primary coils and 4 secondary coils wrapped in OPT,That can reduce distribution capacitance as well,SINOVT is well known as their transformers before they pull the amplifier to market. SpecificationsTubes:5Z4P/5Z4*1, 6SQ7*2, KT66*2Input RCA: 3SPECIFICATIONS:Input sensitivity: 680mVPower output : 2*6.5W (RMS THD<1%)S/N Ratio: 80dBInput Impedance: 100K?Output Impedance: 4?,8?AC Input: 220V/230V /110V (110V version will take around one week to customize)Power Consumption: 85WInsulation Intensity: 100M? (DC2000V, 1min)Frequency Response: 25Hz - 40KHz -1dB17Hz - 60KHz -3dBDimension: 340*230*190?W-D-H?Weight: 14KGPackage Contents:One SINOVT KT66 SE amplifier.

• Binding: Electronics
• Label: RAPHAELITE
• Model: DS66
• Product Group: Receiver or Amplifier

Pro 900-Watt High-Performance Professional Power Amplifier

Cerwin Vega Pro Cv-900 900-Watt High-Performance Professional Power Amplifier



The Cerwin-Vega! CV-Series high performance professional power amplifiers are rugged, 2U rackmountable workhorses with the muscle to accommodate the most demanding audio challenge. With power ratings up to 2800 watts, support for bridged mono operation, exceptional THD (Total Harmonic Distortion) and Signal-to-Noise ratings, the CV Series power amps are the right choice for a wide range of musical tasks. Featuring state-of-the-art designs that include a highly efficient tunnel cooling system to ensure reliable, cool running operation, 21-position detent level control knobs for easily repeatable settings, signal and clip indicators for convenient monitoring of the amplifier's status, and the right connectors for integration into most any environment. The CV-Series Amps are right for the job.

• 1800W Max
• Freq Resp: 20~20 kHz @ +0/-0.3 Db
• Signal To Noise Ratio: 100 Db
• Stereo Output Power: 2 ohms @ 420W; 4 ohms @ 320W; 8 ohms @ 210W

• Binding: Electronics
• Label: Cerwin Vega
• Color: Black
• Department: Pro Sound & Entertainment
• Model: CV-900
• Product Group: Receiver or Amplifier
• Warranty: ONE YEAR

SC-600D Subwoofer Amplifier

Velodyne SC-600D Subwoofer Amplifier



The SC-600 is a matching amplifier to the SC-600 IW and SC-600 IF/IC subwoofers. The 400 Watt amplifier is digitally tuned for dynamic bass and includes distortion limiting electronics. Twin subwoofers can be installed using a rear-panel pass through on one amp to a second SC-600D. (If you want to use one amp to drive two subwoofers, use the SC-602.)The amplifier comes with a remote control with a one-button, 5-band, Auto-EQ room bass optimization feature, four listening presets, night mode, volume controls, phase control and mute mode. The 2 unit high amplifier is easily rack-mounted and uses conventional speaker wires.The amplifier front panel has duplicate controls as well as a mic jack for the Auto-EQ function, low pass crossover frequency control, 12-volt trigger, IR repeater jack and an RS-232 control input that is Crestron certified. The crossover can be set from 30 Hz to 160 Hz. The phase can be set to 0, 90, 180 or 270 degrees.If you are buying an SC-600 series subwoofer, you must power it with either an SC-600 or SC-602 amplifier to reap the benefits of the model-specific EQ settings; no other amplifier includes these.

• Superior 400 Watt headroom for dynamic bass with impact and authority
• DSP digital control and Auto-EQ via included remote and microphone
• Exclusive Velodyne distortion-limiting circuitry prevents audioble distortion
• System friendly: 12-volt trigger, IR repeater jack, RS-232 Controllable (Crestron Certified)
• Twin systems can be run via rear-panel pass through to a second SC-600 amp

• Binding: Electronics
• Label: Velodyne
• Model: SC 600
• Product Group: Receiver or Amplifier

HA4-3 1 X 4 HDMI V1.3B DISTRIBUTION AMPLIFIER

CE LABS HA4-3 1 X 4 HDMI V1.3B DISTRIBUTION AMPLIFIER



CE LABS HA4-3 1 X 4 HDMI V1.3B DISTRIBUTION AMPLIFIER
1 HDMI INPUT & 4 OUTPUTS; DISTRIBUTES 1 HIGH-DEFINITION SOURCE TO UP TO 4 DISPLAYS; COMPLIANT WITH HDMI V1.3B & HDCP STANDARDS; 12-BIT DEEP COLOR SUPPORT; ENHANCED AMPLIFIED SIGNALS FOR LONGER CABLE RUNS; SUPPORTS HIGH-RESOLUTION DISPLAYS OF UXGA, 480I, 480P, 720P,1080I, 1080P; CASCADABLE TO MULTIPLE AMPLIFIERS FOR LARGE TV DISPLAYS; LED PORT INDICATORS VERIFY HDCP HANDSHAKE ; SECURE HDMI CONNECTION WITH INTEGRATED CABLE RETENTION BRACKET; INCLUDES POWER ADAPTER; DIM: 14.95"L X 6.8"W X 1.5"H; WEIGHT: 2.2 LBS

• Binding: Electronics
• Label: CE LABS
• Model: CEIHA43
• Product Group: CE

Model 7125

Outlaw Audio Model 7125



A moderate price never had such a reward. The Model 7125 delivers 7 channels at 125 Watts each, allowing playback of the most recent sound formats without breaking the bank. The Model 7125 is based on the same system architecture and topology as our Model 7200 amplifier. The power stages are virtually the same and the sound is everything you have come to expect from Outlaw. The Model 7125 is built in the USA to our design and specifications.

• Power Output: 7 x 125 watts RMS at 8 ohms, all channels driven from 20 Hz to 20kHz with less than 0.05% THD 7 x 190 watts RMS at 4 ohms, all channels driven from 20 Hz to 20kHz with less than 0.05% THD
• Signal to Noise: 119dB "A" weighted
• Dimensions: (HxWxD): 5.9" with feet x 17.2" x 16.2"
• Weight: 51 lbs
• Power Requirements: 115VAC, +/- 3%, 50Hz - 60 Hz. 1440 watts, maximum

• Binding: Electronics
• Label: Outlaw Audio
• Model: Outlaw Audio Model 7125
• Product Group: CE

7-Channel 200-Watt Amplifier

Adcom GFA-7707 7-Channel 200-Watt Amplifier



ADCOM GFA-7707 7-Channel, 200-Watt Amplifier

• 200W X 7 Channels Into 8 Power Rig Circuit Topology
• Gold-Plated 5-Way Binding Posts
• Power Bandwidth 10 Hz - 100Khz
• 12-Volt Trigger On Circuit
• Dimensions 8.5 X 17 X 17.5 Inches; Unit Weight: 78.2 Lbs

• Binding: Electronics
• Label: Adcom
• Model: GFA-7707
• Product Group: Receiver or Amplifier
• Warranty: FIVE YEARS

stereo Amplifier

Rotel RB981 stereo Amplifier



Rotel RB981 stereo Amplifiersome scratches on top covermissing couple of screws on the back

• Rotel RB981 stereo Amplifier

• Label: Rotel
• Model: RB981
• Product Group: Single Detail Page Misc

AMP BOX DS - Stereo Power Amplifier - Black

PRO-JECT - AMP BOX DS - Stereo Power Amplifier - Black



Ultra compact power amplifier - efficient & audiophile!A ultra high-efficiency Bi-Phase PWM(Pulse Wave Modulation) circuit with SMD parts gives outstanding audio performance and stays cool on the outside. Sound quality is aimed to be as close as possible to Class A tube amplifiers with their liquid and lifelike presentation. The Amp Box Mono S is micro-sized and therefore allows easy placement and can be switched on & off remotely via a trigger signal. A 45cm power-on cable is supplied for this purpose. For Bi- or Tri-amplification use, the remote power-on signal can be relayed to further units.

• NEW! Improved PWM-circuitry (Pulse Wave Modulation)
• NEW! Improved signal spectrum and lower distortion
• High efficiency from mains to audio power (92%)
• Stereo line level input (RCA)
• Gold-plated 5-way speaker binding posts

• Binding: Electronics
• Label: Pro-Ject Audio
• Model: AmpBoxDSBL
• Product Group: Receiver or Amplifier

900W @ 4ohm AMP

CREST 900W @ 4ohm AMP



Crest Audio CPX900 Power amplifier... THIS ITEM IS IN STOCK WILL SHIP SAME DAY M-F IF PAYMENT RECEIVED BY 3:00CT... CPX900Application... CPX? Series Power Amplifiers: Three rugged, ultra-affordable power designs in the great Crest Audio tradition. In typical Crest Audio fashion, we've over-built and over-engineered...

• Hand Carved Solid Spruce Top
• Highly flamed Solid Maple Back, Sides and Neck
• Ebony Fingerboard and Chin Rest
• 3/4 Scale

• Label: Crest Audio
• Model: 1073
• Product Group: CE

Audio DacMagic 100 Silver

Cambridge Audio DacMagic 100 Silver



DacMagic 100 is a mini marvel of digital engineering. Designed to significantly improve the sound quality of your existing digital music devices, DacMagic 100 is capable of extracting real hi-fi sound from all manner of gadgets. By simply connecting any device with a digital audio output - like Blu-ray players, Apple Macs, PCs, TVs and set-top boxes - DacMagic 100 digitally processes the audio signal, dramatically improving sound quality and reducing distortion in an instant. The result is greater detail, sparkling clarity and a real sense of scale and drama.

• Digital to Analogue Converter featuring S/PDIF and Toslink digital inputs and USB audio input (all 24 bit compatible)
• Wolfson WM8742 24bit DAC
• 24-bit/192kHz USB Audio 2.0 input with ASIO or kernel streaming modes
• Asynchronous USB transfer for very low jitter USB Audio input allowing streaming of up to 24-bit/192kHz audio from computer
• USB audio input allows the DacMagic 100 to act as a high quality DAC/soundcard for your computer

• Binding: Electronics
• Label: Cambridge SoundWorks
• Color: Silver
• Model: DacMagic100Silver
• Product Group: Receiver or Amplifier

Power Amplifier Amp CC 5500 W

Crest Audio CC5500 Power Amplifier Amp CC 5500 W



CC5500... Application... Building upon the solid foundation of legendary Crest Audio amplifier designs, our new CC? Series power amps provide tremendous value in proven amplifier technology. CC Series amps deliver worldclass power with exceptional sound quality and value for mobile DJs, working bands, club owners and churches... Design Focus All...

• 1150W @ 8 ohms; 1800W @ 4 ohms; 2750W @ 2 ohms; 5500W @ 4 ohms bridged
• Toroidal power transformer; Dual, variable speed fans
• Balanced XLR inputs; Speakon and 5-way binding post speaker outputs
• Mode selector switch for stereo, parallel and bridged-mono operation
• Input sensitivity selection; Recessed, stepped attenuators; Front panel circuit-breaker switch

• Binding: Electronics
• Label: Crest Audio
• Model: CC5500
• Product Group: CE

NOVA Integrated Hybrid Amplifier - Rosewood

Peachtree Audio NOVA Integrated Hybrid Amplifier - Rosewood



Nova is the answer if you're looking to improve computer-based streaming audio to a "high-end" performance level; or if you just need a new millennium integrated amplifier. Whether it's digital or analog, the Nova will make it sound great! Along with its little brother, the Decco, they're truly the most versatile integrated amplifiers on the market and engineered for the way you listen today. The latest addition to the Peachtree family, the Nova is an audiophile-grade hybrid tube integrated amplifier with impressive digital capabilities. Connect your favorite sources, with 3 analog inputs, 4 digital inputs and 1 USB input offering excellent system flexibility. The powerful 75WPC amplifier will drive most speakers with ease and the Nova even includes a headphone amp and a preamp output, so a subwoofer or more powerful amplifier can be added at any time.It is not often that new milestones in audio are set: The Nova is one of those rare products that fit well into this elite category of firsts. The Nova is a world class 80wpc integrated amplifier with enough digital and analog inputs and outputs to satisfy all the new digital devices, plus, it can handle a few of the old dogs like turntables (w/external phono preamp), tuners, etc.. It performs much like a high-end integrated amplifier because that's what it is. Now all the time, effort, and money you've spent ripping CDs and downloading music is rewarded with truly incredible sound. Even compressed MP3 files sound almost indisti

• Digital to Analog converter
• The pre-amp section employs a 6922 tube with a Class A output stage.

• Binding: Electronics
• Label: Peachtree Audio
• Model: NOVARW
• Product Group: CE

Melody Sp3 Tube Integrated Amplifier European Edition

Melody Sp3 Tube Integrated Amplifier European Edition



The Melody SP3 is the entry level integrated amplifier from Melody designed with absolute sonic purity at it's heart. The Melody SP3 produces 38W/ch from it's four 5881 (military variants of the 6L6GC) valves, two per channel, and offers two, single ended stereo inputs. Despite it's low price, we have made no compromises with the aesthetics or build quality, the casework is manufactured from aluminium with a brushed finish, the dominant feature on the front channel is the oversize volume control which has a silky operation making this amplifier a joy to use as well as to listen to. There are only two other buttons on the front panel, a power on / off and input select, giving this amplifier a contemporary simplicity both operationally and aesthetically. The top plate of the SP3 is dominated by the three large boxes and six aluminium tubes, the six tubes cover a pair of 12AX7, 6922 and 12AU7 whilst the large mid mounted cage covers the four 5881 output tubes. All of these covers are removeable should you wish to see the tubes during operation. The large covers at the rear hide the oversized output transformers whilst the back panel offers three, five way binding posts per channel with 4 and 8 ohm taps and a single pair of inputs each side. Internally the volume control uses switched pairs of resistors, keeping the minimum number of components in the signal path at all times. Melody SP3 internal component choices have been made to maximise both longevity and sound quality, and this amplifier offers stunning build and sound quality at an incredibly low price.

• Vacuum Tube: 5881x4~12Ax7x2,6922x2 12AU7x2
• Power Output: 38W+38W Frequency Response: 20Hz~20KHz
• Input Impedance: 250K? Output Impedance: 4?,8?
• Input Sensitivity: 380Mv S/N: ?90dB T.H.D.: 1% AC Power: 220~240V 50Hz~60Hz
• Dimensions(mm): 275(W)x185(H)x350(D) Weight: 20kg

• Model: au00010
• Product Group: Single Detail Page Misc

Azur - Integrated Amplifier with USB Input - Black

Cambridge Audio - Azur 351A - Integrated Amplifier with USB Input - Black



Prepare to be stunned by the new 351A integrated amplifier. Taking cues from the award-winning 651A amplifier, this slimline yet powerful beauty features an array of components and design principles rarely seen in mid-end systems, let alone entry-level hi-fi. At the heart of the 351A lies a heavyweight toroidal transformer, a premium component chosen for its ability to offer huge power reserves, excellent bass response, depth and rich musical reproduction across the volume range. Our choice of transformer certainly adds cost - and weight - to the 351A but unlike some other brands, we never skimp on the quality of key components which really make a difference to sound quality. In fact, like everything we create, the 351A sports only the features you really need - you won't find any unnecessary bells and whistles here!

• Audiophile grade oversize toroidal transformer and substantial extruded heatsink allowing 2 x 45 Watts RMS into 8 Ohms
• USB audio input allowing USB audio streaming from computer. Front mounted 3.5mm iPod/MP3 player connection
• ALPs film type 'black box' volume pot for superb low level channel balance and stereo imaging. Low dissipation polypropylene signal capacitors and custom made electrolytic capacitors in critical positions.
• Acoustically damped full metal chassis with thick brushed aluminium front panel.
• Supplied with Azur remote handset - also controls Azur CD players and iPod/iPhone docks including Cambridge Audio iD100, iD50 and iD10.. Eco-friendly <1W Standby power consumption.

• Binding: Electronics
• Label: Cambridge Audio
• Model: 351A
• Product Group: Receiver or Amplifier

Amplifier

MPA-201 Amplifier



Sold individually

• 2x100 watt amplifier (1x200w bridged)
• Excellent for use with passive in-wall subwoofers

• Label: Jamo
• Model: MPA-201
• Product Group: CE

R850MC Power Amplifier

Russound R850MC Power Amplifier



Russound R850MC Power Amplifier

• Binding: Electronics
• Label: RUSSOUND
• Product Group: Car Audio or Theater

SONAMP 1230 12-channel black 360W power amplifer

Sonance SONAMP 1230 12-channel black 360W power amplifer



DescriptionA 12-channel amplifier perfect for light commercial or distributed audio applications. Designed with all the best features from the Sonamp 1250MKII including full complimentary discrete output power and selectable auto-on circuitry switch. The Sonamp 1230 allows for bus or discrete audio routing to the desired amplifier channel.

• Output power: 30W x 12 channels @ 8 ohms / 45W x 12 channels @ 4 ohms / 60W x 6 channels @ 8 ohms, bridged
• Dynamic output power: 49W x 12 channels @ 8ohms / 78W x 12 channels @ 4ohms / 158W x 6 channels @ 8ohms, bridged
• Input impedance: 20k ohms
• Inputs: 3 bus line-in jacks (left, right, auxiliary) / 12 direct-input-source jacks (gold plated)
• Outputs: 3 line-out jacks (left, right, auxiliary)

• Binding: Electronics
• Label: Sonance
• Product Group: CE

2-Channel Amplifier

Emotiva UPA-200 2-Channel Amplifier



The Emotiva UPA-200 stereo power amplifier represents a true breakthrough in audiophile-quality amplification. The UPA-200 is a truly affordable stereo power amplifier that can satisfy the most discerning aficionado, and at the same, is affordable to anyone with a desire for real quality. Its rock solid performance and affordable price point makes it an instant classic, and it has all of the qualities you'd expect in a high performance, stereo power amplifier - and much more. An oversized toroidal power supply with plenty of storage reserves, wide flat frequency response, remarkably low noise and distortion, bulletproof protection, and heavy-duty construction are all classic Emotiva traits. Like all Emotiva power amplifiers, it is rated to provide full power under all conditions with all channels driven, and it is also perfectly capable of driving difficult loudspeakers with ease. Pair the UPA-200 with an Emotiva Ultra Series stereo preamplifier or a surround sound processor to create a fantastic sounding home audio system. You might also consider taking advantage of the UPA-200's muscle and finesse to upgrade your current AV receiver for a dramatically enhanced listening experience. Use it to drive your main L&R speakers and hear what you've been missing. The UPA-200's understated styling ensures that is will blend flawlessly with any room d'ecor.

• True audiophile sound quality at an affordable price
• 200 watts x 2 @ 4 Ohms; 125 watts x 2 @ 8 Ohms
• Class A/B output stage and massive power reserves
• Gold plated audiophile grade RCA connectors and speaker terminals
• Microprocessor operating system with comprehensive fault protection.

• Binding: Electronics
• Label: Emotiva Audio Corporation
• Model: UPA-200
• Product Group: Receiver or Amplifier